Làm sao cho ghost tự chạy - file ghost nằm trên CD

[vip1991]

Em có file Ghost XPSP2.GHO (689MB) nên có thể cho nó nằm trên CD, và kèm theo mấy file sau:
ghost.exe
command.com
config.sys(Chưa có dòng lệnh)
io.sys
msdos.sys
Em dùng chương trình UltraISO và WinImage tạo được CD load Boot nhưng khi vào bản để bung ghost thì báo lỗi A:\Auto*.txt(ko nhớ rõ)
File autoexec.bat của em có nộ dung như sau:
@echo off
echo Loading...
CD GHOST
GHOST.EXE -clone,mode=pload,src=XPSP2.GHO:1,dst=1:1 -sure -fx
echo Loading...
echo fffffffffffffffffffffffffffff f
echo Tien Trinh Phuc Hoi Windows Da Hoan Tat
echo Lay Dia CD-Restore Ra Khoi O Dia
echo Press Ctrl+Del De Restart Lai Computer
echo fffffffffffffffffffffffffffff f

Em không biết dòng lệnh của em có đúng chưa mà chạy CD thì báo lỗi như vậy
Help!
Thank

[loicu2589]

*********** tham khao di*************
PowerQuest PartitionInfo -- DOS engine edition.
Date Generated: 07/28/2004 13:23:22

CPU: "AMD"
CPU Vendor: "AuthenticAMD"
CPU Signature: 00000631 CPU Features 0183f9ff


***************************** BOOT.INI *****************************

[boot loader]
timeout=0
default=multi(0)disk(0)rdisk(0)partition(2)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional" /fastdetect
C:\ = "Microsoft Windows"

**************************** CONFIG.SYS ****************************

rem
rem *** DO NOT EDIT THIS FILE! ***
rem
rem This file was created by the System Configuration Utility as
rem a placeholder for your CONFIG.SYS. Your actual CONFIG.SYS
rem file has been saved under the name CONFIG.TSH.
rem

*************************** AUTOEXEC.BAT ***************************

@if exist c:\checkmbr.exe c:\checkmbr quiet (Validate MBR, not a TSR)
SET BLASTXX=A*** IXX DX HX P*** T6
SET SBPCI=C:\SBPCI

LH D:\GHOST\MF.EXE
LH C:\MAGICF97\MF.EXE

**************************** END PREPEND ***************************

Running Program - D:\PHU\DOS\PQMAGIC.OVL

Bio***tensions: 0x2100 Subsets (0x00000005): Access EDD
EGeo 0x0000 0 0 0 78165360 0 512
Disk Geometry requires extended BIOS support

================================================== ==========================
Disk 0: 4865 Cylinders, 255 Heads, 63 Sectors/Track.
Bio***tensions: 0x2100 Subsets (0x00000005): Access EDD
The BIOS supports INT 13h extensions for this drive.
============================ Partition Tables ==============================
Partition -----Begin---- ------End----- Start Num
Sector # Boot Cyl Head Sect FS Cyl Head Sect Sect Sects
---------- - ---- ---- ---- ---- -- ---- ---- ---- ---------- ----------
0 0 80 [ 0 1 1] 0C [1023 15 63] 63 24611517 [Large Drive Placeholders]
0 1 1 1531 254 63 Actual Values
0 1 00 [1023 15 63] 0C [1023 15 63] 24611580 27519345 [Large Drive Placeholders]
1532 0 1 3244 254 63 Actual Values
0 2 00 [1023 15 63] 0F [1023 15 63] 52130925 26025300 [Large Drive Placeholders]
3245 0 1 4864 254 63 Actual Values
52130925 0 00 [1023 15 63] 0B [1023 15 63] 52130988 14995764 [Large Drive Placeholders]
3245 1 1 4178 113 63 Actual Values
Error #108: Partition didn't end on cylinder boundary.
ucEndHead expected to be 254, not 113.


================================================== ================================
Disk 0: 38162.2 Megabytes
============================= Partition Information ==============================
Volume Partition Partition Start Total
Letter:Label Type Status Size MB Sector # Sector Sectors
------------- --------------- -------- -------- ---------- - ---------- ----------
Type 00 Pri 38162.2 108 0 0 78156225


}
Exiting enStartEngine... Return value: 0 Time = 0:24
Entering enStopEngine(...) ID:193 File:Engine.cpp Line:390
{
DbgMgr->Uninit

[ngondensang2007]

bác này đào mộ sâu thế

[asdasa123]

cài mới luôn đi bạn ơi