N.
NAVSMOTION Displays the ShowMotion interface
NAVSMOTIONCLOSE Closes the ShowMotion interface
NAVSWHEEL Displays the SteeringWheels
NAVVCUBE Controls the visibility and display properties of the ViewCube
NETLOAD Loads a .NET application
NEW Creates a new drawing
NEWSHEETSET Creates a new sheet set
NEWSHOT Creates a named view with motion that is played back when viewed with ShowMotion.
NEWVIEW Creates a named view with no motion
O.
OBJECTSCALE Adds or deletes supported scales for annotative objects
OFFSET Creates concentric circles, parallel lines, and parallel curves
OLELINKS Updates, changes, and cancels existing OLE links
OLESCALE Controls the size, scale, and other properties of a selected OLE object
OOPS Restores erased objects
OPEN Opens an existing drawing file
OPENDWFMARKUP Opens a DWF or DWFx file that contains markups
OPENSHEETSET Opens a selected sheet set
OPTIONS Customizes the program settings
ORTHO Constrains cursor movement to the horizontal or vertical direction
OSNAP Sets running object snap modes
P.
PAGESETUP Controls the page layout, plotting device, paper size, and other settings for each new layout
PAN Moves the view in the current viewport
PARTIALOAD Loads additional geometry into a partially opened drawing
PARTIALOPEN Loads geometry and named objects from a selected view or layer into a drawing
PASTEASHYPERLINK Inserts data from the Clipboard as a hyperlink
PASTEBLOCK Pastes copied objects as a block
PASTECLIP Inserts data from the Clipboard
PASTEORIG Pastes a copied object in a new drawing using the coordinates from the original drawing
PASTESPEC Inserts data from the Clipboard and controls the format of the data
PCINWIZARD Displays a wizard to import PCP and PC2 configuration file plot settings into the Model tab or current layout
PEDIT Edits polylines and 3D polygon meshes
PFACE Creates a three-dimensional polyface mesh vertex by vertex
PLAN Displays the plan view of a specified user coordinate system
PLANESURF Creates a planar surface
PLINE Creates a 2D polyline
PLOT Plots a drawing to a plotter, printer, or file
PLOTSTAMP Places a plot stamp on a specified corner of each drawing and logs it to a file
PLOTSTYLE Sets the current plot style for new objects or assigns a plot style to selected objects
PLOTTERMANAGER Displays the Plotter Manager, where you can add or edit a plotter configuration
PNGOUT Saves selected objects to a file in a Portable Network Graphics format
POINT Creates a point object
POINTLIGHT Creates a point light
POLYGON Creates an equilateral closed polyline
POLYSOLID Creates a 3D wall-likepolysolid
PRESSPULL Presses or pulls bounded areas
PREVIEW Shows how the drawing will look when it is plotted
PROPERTIES Controls properties of existing objects
PROPERTIESCLOSE Closes the Properties palette
PSETUPIN Imports a user-defined page setup into a new drawing layout
PSPACE Switches from a model space viewport to paper space
PUBLISH Publishes drawings to DWF or DWFx files or plotters
PUBLISHTOWEB Creates HTML pages that include images of selected drawings
PURGE Removes unused named items, such as block definitions and layers, from the drawing
PYRAMID Creates a 3D solid pyramid
Q.
QCCLOSE Closes QuickCalc
QDIM Quickly creates a series of dimensions from selected objects
QLEADER Creates a leader and leader annotation
QNEW Starts a new drawing with the option of using a default drawing template file
QSAVE Saves the current drawing using the file format specified in the Options dialog box
QSELECT Creates a selection set based on filtering criteria
QTEXT Controls the display and plotting of text and attribute objects
QUICKCALC Opens the QuickCalc calculator
QUICKCUI Displays the Customize User Interface dialog box in a collapsed state
QUIT Exits the program
QVDRAWING Displays open drawings and layouts in a drawing in preview images
QVDRAWINGCLOSE Closes preview images of open drawings and layouts in a drawing
QVLAYOUT Displays preview images of model space and layouts in a drawing
QVLAYOUTCLOSE Closes preview images of model space and layouts in a drawing
R.
RAY Creates a line that starts at a point and continues to infinity
RECOVER Repairs a damaged drawing
RECOVERALL Repairs a damaged drawing and xrefs
RECTANG Creates a rectangular polyline
REDEFINE Restores AutoCAD internal commands overridden by UNDEFINE
REDO Reverses the effects of previous UNDO or U command
REDRAW Refreshes the display in the current viewport
REDRAWALL Refreshes the display in all viewports
REFCLOSE Saves back or discards changes made during in-place editing of a reference (an xref or a block)
REFEDIT Selects an external reference or block reference for editing
REFSET Adds or removes objects from a working set during in-place editing of a reference (an xref or a block)
REGEN Regenerates the entire drawing from the current viewport
REGENALL Regenerates the drawing and refreshes all viewports
REGENAUTO Controls automatic regeneration of a drawing
REGION Converts an object that encloses an area into a region object
REINIT Reinitializes the digitizer, digitizer input/output port, and program parameters file
RENAME Changes the names of named objects
RENDER Creates a photorealistic or realistically shaded image of a three-dimensional wireframe or solid model
RENDERCROP Selects a specific region (crop window) in an image for rendering
RENDERENVIRONMENT Provides visual cues for the apparent distance of objects
RENDEREXPOSURE Provides settings to interactively adjust the global lighting for the most recent rendered output
RENDERPRESETS Specifies render presets, reusable rendering parameters, for rendering an image
RENDERWIN Displays the Render Window without invoking a render task
RENDSCR Obsolete
RESETBLOCK Resets one or more dynamic block references to the default values of the block definition
RESUME Continues an interrupted script
REVCLOUD Creates a revision cloud using a polyline
REVOLVE Creates a 3D solid or surface by sweeping a 2D object around an axis
REVSURF Creates a revolved mesh about a selected axis
RIBBON Opens the ribbon window
RIBBONCLOSE Closes the ribbon window
RMAT Obsolete
ROTATE Rotates objects around a base point
ROTATE3D Moves objects about a three-dimensional axis
RPREF Displays the Advanced Render Settings palette for access to advanced rendering settings
RPREFCLOSE Closes the Render Settings palette if it is displayed
RSCRIPT Repeats a script file
RULESURF Creates a ruled mesh between two curves
S.
SAVE Saves the drawing under the current file name or a specified name
SAVEAS Saves a copy of the current drawing under a new file name
SAVEIMG Saves a rendered image to a file
SCALE Enlarges or reduces selected objects, keeping the proportions of the object the same after scaling
SCALELISTEDIT Controls the list of scales available for layout viewports, page layouts, and plotting
SCALETEXT Enlarges or reduces selected text objects without changing their locations
SCRIPT Executes a sequence of commands from a script file
SECTION Uses the intersection of a plane and solids to create a region
SECTIONPLANE Creates a section object that acts as a cutting plane through a 3D object
SECURITYOPTIONS Controls security settings using the Security Options dialog box
SELECT Places selected objects in the Previous selection set
SETBYLAYER Changes the property overrides of selected objects to ByLayer
SETIDROPHANDLER Specifies the default type of i-drop content for the current Autodesk application
SETUV Obsolete
SETVAR Lists or changes the values of system variables
SHADEMODE Starts the VSCURRENT command
SHAPE Inserts a shape from a shape file that has been loaded using LOAD
SHEETSET Opens the Sheet Set Manager
SHEETSETHIDE Closes the Sheet Set Manager
SHELL Accesses operating system commands
SHOWMAT Obsolete
SHOWPALETTES Restores the display of hidden palettes
SIGVALIDATE Displays information about the digital signature attached to a file
SKETCH Creates a series of freehand line segments
SLICE Slices a solid with a plane or surface
SNAP Restricts cursor movement to specified intervals
SOLDRAW Generates profiles and sections in viewports created with SOLVIEW
SOLID Creates solid-filled triangles and quadrilaterals
SOLIDEDIT Edits faces and edges of 3D solid objects
SOLPROF Creates profile images of three-dimensional solids in paper space
SOLVIEW Creates layout viewports using orthographic projection to lay out multi- and sectional view drawings of 3D solids and body objects
SPACETRANS Calculates equivalent model space and paper space lengths in a layout
SPELL Checks spelling in a drawing
SPHERE Creates a 3D solid sphere
SPLINE Creates a smooth curve that passes through or near selected points
SPLINEDIT Edits a spline or spline-fit polyline
SPOTLIGHT Creates a spotlight
STANDARDS Manages the association of standards files with drawings.
STATUS Displays drawing statistics, modes, and extents
STLOUT Stores a solid in an ASCII or binary file
STRETCH Stretches objects crossed by a selection window or polygon
STYLE Creates, modifies, or specifies text styles
STYLESMANAGER Displays the Plot Style Manager
SUBTRACT Combines selected 3D solids or 2D regions by subtraction
SUNPROPERTIES Opens the Sun Properties window and sets the properties of the sun
SUNPROPERTIESCLOSE Closes the Sun Properties window
SWEEP Creates a 3D solid or surface by sweeping a 2D object along a path
SYSWINDOWS Arranges windows and icons when the application window is shared with external applications
T.
TABLE Creates an empty table object
TABLEDIT Edits text in a table cell
TABLEEXPORT Exports data from a table object in CSV file format
TABLESTYLE Creates, modifies, or specifies table styles
TABLET Calibrates, configures, and turns on and off an attached digitizing tablet
TABSURF Creates a tabulated mesh from a path curve and a direction vector
TARGETPOINT Creates a target point light
TASKBAR Controls how drawings are displayed on the Windows taskbar
TEXT Creates a single-line text object
TEXTSCR Opens the text window
TEXTTOFRONT Brings text and dimensions in front of all other objects in the drawing
THICKEN Creates a 3D solid by thickening a surface
TIFOUT Saves selected objects to a file in TIFF file format
TIME Displays the date and time statistics of a drawing
TINSERT Inserts a block in a table cell
TOLERANCE Creates geometric tolerances contained in a feature control frame
TOOLBAR Displays, hides, and customizes toolbars
TOOLPALETTES Opens the Tool Palettes window
TOOLPALETTESCLOSE Closes the Tool Palettes window
TORUS Creates a donut-shaped 3D solid
TPNAVIGATE Displays a specified tool palette or palette group
TRACE Creates solid lines
TRANSPARENCY Controls whether background pixels in a bitonal image are transparent or opaque
TRAYSETTINGS Controls the display of icons and notifications in the status bar tray
TREESTAT Displays information about the drawing's current spatial index
TRIM Trims objects to meet the edges of other objects
U.
U Reverses the most recent operation
UCS Manages user coordinate systems
UCSICON Controls the visibility and placement of the UCS icon
UCSMAN Manages defined user coordinate systems
UNDEFINE Allows an application-defined command to override an internal command
UNDO Reverses the effect of commands
UNION Combines selected 3D solids or 2D regions by addition
UNITS Controls coordinate and angle display formats and precision
UPDATEFIELD Manually updates fields in selected objects in the drawing
UPDATETHUMBSNOW Manually updates thumbnail previews for sheets, sheet views, and model space views in the Sheet Set Manager; and thumbnail previews for drawings and layouts in Quick View.
V.
VBAIDE Displays the Visual Basic Editor
VBALOAD Loads a global VBA project into the current work session
VBAMAN Loads, unloads, saves, creates, embeds, and extracts VBA projects
VBARUN Runs a VBA macro
VBASTMT Executes a VBA statement at the AutoCAD command prompt
VBAUNLOAD Unloads a global VBA project
VIEW Saves and restores named views, camera views, layout views, and preset views
VIEWGO Restores a named view
VIEWPLAY Plays the animation associated to a named view
VIEWPLOTDETAILS Displays information about completed plot and publish jobs
VIEWRES Sets the resolution for objects in the current viewport
VISUALSTYLES Creates and modifies visual styles and applies a visual style to a viewport
VISUALSTYLESCLOSE Closes the Visual Styles Manager
VLISP Displays the Visual LISP interactive development environment (IDE)
VPCLIP Clips viewport objects and reshapes the viewport border
VPLAYER Sets layer visibility within viewports
VPMAX Expands the current layout viewport for editing
VPMIN Restores the current layout viewport
VPOINT Sets the viewing direction for a three-dimensional visualization of the drawing
VPORTS Creates multiple viewports in model space or paper space
VSCURRENT Sets the visual style in the current viewport
VSLIDE Displays an image slide file in the current viewport
VSSAVE Saves a visual style
VTOPTIONS Displays a change in view as a smooth transition
W.
WALKFLYSETTINGS Specifies walk and fly settings
WBLOCK Writes objects or a block to a new drawing file
WEBLIGHT Creates a web light
WEDGE Creates a 3D solid wedge
WHOHAS Displays ownership information for opened drawing files
WIPEOUT Creates wipeout objects
WMFIN Imports a Windows metafile
WMFOPTS Sets options for WMFIN
WMFOUT Saves objects to a Windows metafile
WORKSPACE Creates, modifies, and saves workspaces and makes a workspace current
WSSAVE Saves a workspace
WSSETTINGS Sets options for workspaces
X.
XATTACH Attaches an external reference to the current drawing
XBIND Binds one or more definitions of named objects in an xref to the current drawing
XCLIP Defines an xref or block clipping boundary and sets the front and back clipping planes
XEDGES Creates wireframe geometry by extracting edges from a 3D solid or surface
XLINE Creates a line of infinite length
XOPEN Opens a selected drawing reference (xref) in a new window
XPLODE Breaks a compound object into its component objects
XREF Starts the EXTERNALREFERENCES command
Z.
ZOOM Increases or decreases the apparent size of objects in the current viewport
Bookmarks