RivaTuner 2.0 RC 15.1

[Ghost1982]

Soft này dùng để tweaking card màn hình NVIDIA, nói đơn giản là đồ OC card màn hình

RivaTuner is the most powerful tweaking utility for NVIDIA display adapters running under Windows 98 / Windows 98 SE / Windows ME / Windows 2000 and Windows XP. The purpose of this utility is to give you access to all the undocumented features of the Detonator drivers.

All versions of the Detonator drivers have a lot of undocumented registry entries. Some of them don’t affect anything, but there are some that are very useful. In general, they cannot give you big performance boost but they can improve image quality and solve some compatibility problems.

RivaTuner will help you to change all undocumented registry entries.

What's New in This Release:

· Added ForceWare 65.xx - 66.xx driver families support.
· Added databases for the ForceWare 61.76, 61.77, 65.05, 65.91 and 66.00 drivers for Windows 2000/XP.
· Updated ForceWareAntipotector and NVStrap antiprotection patch scripts for the ForceWare 61.76, 61.77, 65.05, 65.91 and 66.00 drivers for Windows 2000/XP.
· Added PCI-E NV40 series display adapters support.
· Added experimental R423 support. Thanks to Andrew Worobiew for testing RivaTuner with PCI-E RADEON X800XT.
· Added experimental NV41 / NV43 support. Thanks to Andrew Worobiew for testing RivaTuner with NV43 sample.
· A lot of NV40 / R420 specific enhancements, new diagnostic and tuning features. Thanks to Andrew Woribiew for providing ATI RADEON X800PRO and NVIDIA GeForce 6800 samples.
· Added active pixel pipelines / vertex processors count detection for NV4x based display adapters.
· Updated bundled NVInfo v1.3 DOS utility. Now NVInfo supports NV40 series and can display diagnostic info including active pixel pipelines / vertex processors count. This feature allows you to verify NV40 based display adapter right from the bootable floppy before purchasing it.
· Updated bundled NVStrap v1.5 driver. Now the driver supports NV40 / NV41 / NV43 GPU series and provides NV40 / NV41 / NV43 owners previously available AGP SBA / AGP FW and PCI DeviceID strapping settings as well as absolutely new unique feature specific for this GPU family - custom graphics processor configuration panel.
· Updated "NVIDIA VGA BIOS information" diagnostic report category for NV40 GPU based display adapters
· Added GPU units mask info for NV4x GPU based boards. This mask tells you if VGA BIOS contains any softmasked pixel pipelines and vertex processors and can be used for fast detecting softmoddable boards.
· Removed obsolete VCO frequency limits info for NV40 GPU based boards.
· Updated "NVIDIA specific display adapter information" diagnostic report category. Now besides hardwired ID RivaTuner displays ROM softstrapped PCI DeviceID on NV3X+ based boards.
· Now RivaTuner decodes driver-level startup clocks using PCI DeviceID requested via the ForceWare driver rather then the real PCI DeviceID to support startup clocks detection on NVIDIA PCI-E display adapters.
· Now during displaying "NVIDIA VGA BIOS information" diagnostic report category RivaTuner reads VGA BIOS contents directly from flash ROM. This feature was implemented in order to access NV40's performance level tables, located outside ROM copy accessible via standard ISA address space.
· Added DVC control for NV4x based boards.
· Added RADEON 9550 series support.
· Updated SoftR9x00 and ATIOverclockingAntiprotection patch scripts for the Catalyst 4.7, 4.8 beta, 4.8 and 4.9 beta for Windows 2000/XP.
· Added fan duty cycle monitoring for LM63 capable R360 and R420 based boards with reference cooling system.
· Added fan speed control for LM63 capable R360 and R420 based boards with reference cooling system. Now you may use either default temperature controlled dynamic fan speed mode, or improve your R360/R420 cooling at the cost of noise due to fixed 100% fan speed mode.
· Added detailed memory timings decryption for R420 based display adapters.
· Added DDR3 memory type detection for R420 based display adapters.
· Added command line interface for saving VGA BIOS image for all supported NVIDIA display adapters and ATI R300+ based display adapters. Use /BI command line switch to extract and save VGA BIOS image in a file.
· Updated RivaTunerEx.sys driver incorporates new IOCTL, allowing RivaTuner to execute some portions of code in kernel mode. Since this version RivaTuner executes all low-level I2C access code in kernel mode to minimize risk of collision with other applications accessing ATI I2C bus at low level. However, the previous user mode I2C access method can be also activated with ATII2CKernelModeAccess registry entry.
· Improved graphics processor core detection scheme for both NVIDIA and ATI display adapters. Now RivaTuner.cfg file contains user customizable PCI DeviceID indexed table of supported graphics processors. This will not make RivaTuner forward compatible with future graphics processors, but will greatly simplify process of adding support of new display adapters based on supported GPUs.
· Improved patch script interpretator.
· Updated monitor manufacturers list.
· Improved database format. Now string registry entries may also use interpretators of ENUM type.
· Now all RivaTuner's command line interfaces can provide an access to non-primary display adapters.
· Now RivaTuner's tray icon is automatically restored after taskbar recreation.
· Easter eggs updates. Added hidden command line interface for AND, OR and XOR based GPU registers modification commands.
· Added about 10 new NV40 softmodding, NVIDIA & ATI overclocking related questions to FAQ.
· Minor UI changes and improvements.
Download free
WinAll 1,29M
http://download.softpedia.com:8080/TWEACK/RivaTuner20RC151.exe

[Yaiba]

link die rồi bác ghost ơi...

[x_men]

bạn vào trang www.guru3d.com để download. Hình như phần mềm này đã đăng hướng dẫn sử dụng trên PCWorldVN cách đây chừng 1, 2 tháng (tui nhớ không rõ lắm)