Mình thấy học ở Bkacad là good nhất.
Mình thấy học ở Bkacad là good nhất.
2/7 này TECHNET mở lớp CCNA hè:
- Lịch học: 18h - 21h các ngày từ Thứ 2 đến Thứ 7 (6 buổi/tuần, 3 giờ/buổi ~> 5 tuần là học xong ~> xác định "toàn tâm toàn ý" dành ra 5 tuần chỉ có học CCNA )
- Học phí: 1,5M.
- Được học cùng vào 1 lớp đang học tối 2 4 6 (18h - 21h) để "test" thầy cũng như cơ sở vật chất, máy móc...
- Được học lại miễn phí.
Chi tiết xem tại: t e c h n e t . c o m . v n hoặc liên hệ hotline: 0906 175 020!
Bạn chịu khó qua từng trung tâm tham khảo ý kiến trực tiếp của học viên thì hay hơn
IPmac ở ngay trên đội cấn giao với giang văn minh ~~! có phòng lap thực hành ngoài giờ học ~~!
nếu học ipmac thì gặp tôi luôn ~~! 30 này bắt đầu học rồi ~~! sinh viên nên được ưu đãi còn có 3m4 ~~!
Được sửa bởi nino lúc 23:48 ngày 26-07-2012
mình cũng đang học CCNA. mình học ở FPT bạn ạ. đào tạo rất tốt
Khủng khoảng kinh tế thật đáng sợ, hàng loạt doanh nghiệp phải giảm biên chế hoặc đóng cửa. Cơ hội việc làm ngày càng khó, nhất là đối với học viên mới ra trường. Đây là lúc chúng ta cần nâng cao kỹ năng và kinh nghiệm làm việc để chuẩn bị cho mình một cơ hội mới.
Học Cisco CCNA - 1.5 triệu
- Chỉ áp dụng cho các lớp CCNA theo lịch khai giảng
- Không áp dụng các chế độ miễn giảm học phí khác, trừ chế độ giảm 10% cho học viên cũ.
- Mỗi lớp tối đa 15 học viên, ưu tiên học viên đăng ký trước.
Để biết thêm chi tiết mời liên hệ:
Bộ phận tư vấn tuyển sinh
Tel: (04). 6273 1335/ 3762 3389 | Email: training@vnexperts.net
Đ/c: P.402A, tòa nhà 347 Đội cấn Ba đình Hà nội
VnExperts - học Cisco CCNA chỉ từ 2.1tr
technet là hợp lý nhất với sinh viên
Với đội ngũ giảng viên giàu kinh nhiệm, nhiệt tình trong giảng dậy
Phòng Lab hiện đại với 01 máy chiếu, 20 Pc cấu hình mạnh, trang thiết bị thực hành đầy đủ.
Technet đảm bảo sẽ mang đến khóa học CCNA tốt nhất cho học viên tham gia khóa học với chi phí thấp nhất.
Ưu đãi đặc biệt cho năm học mới với mức học phí chỉ còn 2.500.000vnđ khi đăng kí học trong tháng 8 và 9 này.
Bạn có thể tham khảo thêm thông tin các khóa học của học viện CNTT NIIT iPMAC. Học viện luôn có các chương trình ưu đãi học phí đặc biệt. Nếu đăng kí học CCNA trong tháng 9, bạn còn được tặng kèm khóa CCNA VoIP.Để có thêm chi tiết, bạn có thể gọi đến số 043 771 0668 gặp bộ phận tư vấn tuyển sinh để được giải đáp !
Khóa học CCNA Academy
Khóa học CCNA mới nhất học theo chương trình CCNA 4.0 và kỳ thi 640-802 với nội dung chi tiết như sau.
Những ưu điểm nổi bật của khóa học CCNA tại PNH
• Trong đó: 03 buổi/tuần & 2h/buổi.
• Môi trường học tập lý tưởng: 100% giờ học trong phòng Lab với hệ thống thiết bị Cisco.
• Giáo trình: Tài liệu học chuẩn bằng sách (Có kèm CD)
• Giáo viên: CCNP trở lên.
• Sỹ số: 15 học viên/lớp
Sau khi kết thúc khóa học CCNA 4.0, học viên có những khả năng:
• Sẵn sàng tham gia kỳ thi lấy chứng chỉ CCNA quốc tế tại PNH – trung tâm khảo thí ủy quyền tổ chức các kỳ thi của Cisco (VUE).
• Cấu hình thành thạo các thiết bị mạng : Router, Switch, triển khai các kết nối WAN.
• Thiết kế, triển khai VLAN
• Triển khai mạng WiFi
• Nhận chứng nhận hoàn thành khóa học CCNA Academy do PNH cấp sau khi đạt 90% điểm bài thi cuối khóa tại PNH.
• Nội dung khóa học
P1: Describe how a network works
• Describe the purpose and functions of various network devices
• Select the components required to meet a network specification
• Use the OSI and TCP/IP models and their associated protocols to explain how data flows in a network
• Describe common networked applications including web applications
• Describe the purpose and basic operation of the protocols in the OSI and TCP models
• Describe the impact of applications (Voice Over IP and Video Over IP) on a network
• Interpret network diagrams
• Determine the path between two hosts across a network
• Describe the components required for network and Internet communications
• Identify and correct common network problems at layers 1, 2, 3 and 7 using a layered model approach
• Differentiate between LAN/WAN operation and features.
• P2: Configure, verify and troubleshoot a switch with VLANs and interswitch communications
• Select the appropriate media, cables, ports, and connectors to connect switches to other network devices and hosts
• Explain the technology and media access control method for Ethernet networks
• Explain network segmentation and basic traffic management concepts
• Explain basic switching concepts and the operation of Cisco switches
• Perform and verify initial switch configuration tasks including remote access management
• Verify network status and switch operation using basic utilities (including: ping, traceroute, telnet, SSH, arp, ipconfig), SHOW & DEBUG commands
• Identify, prescribe, and resolve common switched network media issues, configuration issues, auto negotiation, and switch hardware failures
• Describe enhanced switching technologies (including: VTP, RSTP, VLAN, PVSTP, 802.1q)
• Describe how VLANs create logically separate networks and the need for routing between them
• Configure, verify, and troubleshoot VLANs
• Configure, verify, and troubleshoot trunking on Cisco switches
• Configure, verify, and troubleshoot interVLAN routing
• Configure, verify, and troubleshoot VTP
• Configure, verify, and troubleshoot RSTP operation
• Interpret the output of various show and debug commands to verify the operational status of a Cisco switched network.
• Implement basic switch security (including: port security, trunk access, management vlan other than vlan1, etc.)
P3: Implement an IP addressing scheme and IP Services to meet network requirements in a medium-size Enterprise branch office network.
• Describe the operation and benefits of using private and public IP addressing
• Explain the operation and benefits of using DHCP and DNS
• Configure, verify and troubleshoot DHCP and DNS operation on a router.(including: CLI/SDM)
• Implement static and dynamic addressing services for hosts in a LAN environment
• Calculate and apply an addressing scheme including VLSM IP addressing design to a network
• Determine the appropriate classless addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment
• Describe the technological requirements for running IPv6 in conjunction with IPv4 (including: protocols, dual stack, tunneling, etc).
• Describe IPv6 addresses
• Identify and correct common problems associated with IP addressing and host configurations
P4: Configure, verify, and troubleshoot basic router operation and routing on Cisco devices
• Describe basic routing concepts (including: packet forwarding, router lookup process)
• Describe the operation of Cisco routers (including: router bootup process, POST, router components)
• Select the appropriate media, cables, ports, and connectors to connect routers to other network devices and hosts
• Configure, verify, and troubleshoot RIPv2
• Access and utilize the router to set basic parameters.(including: CLI/SDM)
• Connect, configure, and verify operation status of a device interface
• Verify device configuration and network connectivity using ping, traceroute, telnet, SSH or other utilities
• Perform and verify routing configuration tasks for a static or default route given specific routing requirements
• Manage IOS configuration files. (including: save, edit, upgrade, restore)
• Manage Cisco IOS.
• Compare and contrast methods of routing and routing protocols
• Configure, verify, and troubleshoot OSPF
• Configure, verify, and troubleshoot EIGRP
• Verify network connectivity (including: using ping, traceroute, and telnet or SSH)
• Troubleshoot routing issues
• Verify router hardware and software operation using SHOW & DEBUG commands.
• Implement basic router security
P5: Explain and select the appropriate administrative tasks required for a WLAN
• Describe standards associated with wireless media (including: IEEE WI-FI Alliance, ITU/FCC)
• Identify and describe the purpose of the components in a small wireless network. (Including: SSID, BSS, ESS)
• Identify the basic parameters to configure on a wireless network to ensure that devices connect to the correct access point
• Compare and contrast wireless security features and capabilities of WPA security (including: open, WEP, WPA-1/2)
• Identify common issues with implementing wireless networks. (Including: Interface, missconfiguration)
P6: Identify security threats to a network and describe general methods to mitigate those threats
• Describe today's increasing network security threats and explain the need to implement a comprehensive security policy to mitigate the threats
• Explain general methods to mitigate common security threats to network devices, hosts, and applications
• Describe the functions of common security appliances and applications
• Describe security recommended practices including initial steps to secure network devices
P7: Implement, verify, and troubleshoot NAT and ACLs in a medium-size Enterprise branch office network.
• Describe the purpose and types of ACLs
• Configure and apply ACLs based on network filtering requirements.(including: CLI/SDM)
• Configure and apply an ACLs to limit telnet and SSH access to the router using (including: SDM/CLI)
• Verify and monitor ACLs in a network environment
• Troubleshoot ACL issues
• Explain the basic operation of NAT
• Configure NAT for given network requirements using (including: CLI/SDM)
• Troubleshoot NAT issues
P8: Implement and verify WAN links
• Describe different methods for connecting to a WAN
• Configure and verify a basic WAN ****** connection
• Configure and verify Frame Relay on Cisco routers
• Troubleshoot WAN implementation issues
• Describe VPN technology (including: importance, benefits, role, impact, components)
• Configure and verify a PPP connection between Cisco routers
Mọi thông tin chi tiết về nội dung khóa học xin liên hệ với phòng tuyển sinh theo địa chỉ sau:
Học viện quản trị mạng cao cấp PNH -Số 8 Tôn Thất Thuyết- Cầu Giấy- Hà Nội
Yahoo : nothinggonnachangemylovetoyou
Tel : 01649 58 72 77 ( Mr Tân)
Bookmarks