PDA

View Full Version : RegDelete for Studio 11



VTABC
19-05-2007, 14:39
RegDelete for Studio 11

RegDelete is a utility that corrects problems that may occur when installing and uninstalling Studio applications.

Version 11.0 is compatible with the following Studio Products : Studio 11, Studio 10, Studio 9, Studio 8, Studio 7, Media Manager, Pinnacle Expression and Pinnacle Express

When you install and run any of Pinnacle''s Studio applications, data is stored in the system's Registry. If this data becomes corrupted, the application may not function correctly. To use RegDelete follow these steps:
Download RegDelete
Uninstall the Studio application. To do this, open the Windows Control Panel and open the Add/Remove Programs applet. Select the Studio product you want to remove, and click Add/Remove. Don''t forget to rebbot your system.
Run RegDelete by double clicking on the RegDelete icon. Select the appropriate Studio product from the list, then click Clean . The registry entries for that product will be removed. The tool also has a check box labeled Remove video capture driver entries . If you select this check box, registry entries for all your installed video capture devices will be removed, including devices from other manufacturers. If you want to use other devices, they will have to be reinstalled after this step.
Reinstall the Studio application.

After this is installed and you run the application for the first time, the registry entries will be set to their default values.

Please note: If you use this tool without reinstalling afterwards, your Studio application will not work. If you are experiencing a problem which you suspect is due to corrupt registry settings, you are advised to first just do an uninstall followed by a reinstall. If the problem still persists, you should try the steps outlined above. Checking the Remove video capture driver entries box is only recommended if you have had other video capture devices installed in your system which you have since removed. In certain situations, old video capture devices that have not been uninstalled correctly have been known to interfere with the Studio application.
http://cdn.pinnaclesys.com/SupportFiles/Studio11/RegDelete.exe
===============
RegDelete là một tiện ích mà sửa chữa những vấn đề mà có thể xuất hiện khi thiết lập(lắp ráp) và những ứng dụng Trường quay uninstalling.
Phiên bản 11.0 (thì) thích hợp với những sản phẩm Trường quay sau đây: Trường quay 11, Trường quay 10, Trường quay 9, Trường quay 8, Trường quay 7, Giám đốc và Tháp nhọn Trung bình Biểu thức Tháp nhọn Biểu thị
Khi bạn thiết lập(lắp ráp) và chạy bất kỳ Tháp nhọn'' S Những ứng dụng Trường quay, dữ liệu được cất giữ trong Nơi đăng ký (của) hệ thống. Nếu dữ liệu này trở nên bị hư hỏng, ứng dụng có thể không vận hành chính xác. Để sử dụng RegDelete đi theo sau những bước này
Tải xuống RegDelete
Uninstall ứng dụng Trường quay. Để làm điều này, mở bảng điều khiển Windows và mở Thêm/Bớt những chương trình applet. Lựa chọn sản phẩm Trường quay bạn muốn loại bỏ, và kích Thêm/Bớt. Shell-fish'' t Quên tới rebbot Hệ thống (của) các bạn.
RegDelete được chạy bởi việc nhấn đúp trên biểu tượng RegDelete.
Sau khi đây được thiết đặt và bạn chạy ứng dụng trong lần đầu, những mục nơi đăng ký sẽ được thiết lập tới những giá trị ngầm định của họ.
Xin ghi chú: Nếu bạn sử dụng công cụ này không có việc cài đặt lại về sau, ứng dụng Trường quay (của) các bạn sẽ không làm việc. Nếu bạn đang trải qua một vấn đề nào bạn nghi ngờ vì những sự thiết đặt nơi đăng ký hư hỏng, bạn khuyên đầu tiên chỉ làm một uninstall đi theo sau gần Một Cài đặt lại. Nếu vấn đề vẫn còn vẫn còn, bạn cần phải thử những bước được phác thảo ở trên. Kiểm tra sự Loại bỏ (dời) cái hộp những mục người điều khiển bắt viđêô (thì) chỉ được khuyến cáo nếu bạn có có sự bắt viđêô khác những thiết bị thiết đặt trong hệ thống (của) các bạn mà bạn có kể từ khi Loại bỏ.